KU LNA BB 050700 B, Broadband Low Noise Amplifier
500 ... 7000 MHz
Monitoring systems test equipment
- Low ripple
- High bandwidth
- Good input and output matching
- Reverse polarity protection
- Super-small mechanical dimensions
The low noise broadband preamplifier KU LNA BB 050700 B impresses with a very low ripple of typ. +/- 1 dB over the wide frequency range from 500 MHz to 7 GHz. Gain and noise figure are typically 21 dB and 1.6 dB, respectively. Furthermore, the LNA shows a high IP3 and an output power of more than 100 mW. These outstanding technical properties result in a wide range of possible applications.
Lead time on request
Technical specifications
Frequency range | 500..7000 MHz |
Noise figure @ 18 °C | typ. 1.6 dB, max. 2 dB @ 7 GHz |
Gain | typ. 21 dB, min. 18 dB @ 7 GHz |
Gain flatness | max. +/- 2 dB |
Maximum input power | 16 dBm |
Output power (P1dB) | typ. 20 dBm |
Output IP3 | typ. 30 dBm, min. 27 dBm |
Input return loss (S11) | min. 10 dB |
Supply voltage | +9 ... 14 V DC |
Current consumption | typ. 80 mA |
Operating case temp. range | -40 ... +65 °C |
Input connector / impedance | SMA-female, 50 ohms |
Output connector / impedance | SMA-female, 50 ohms |
Case | milled aluminium |
Dimensions (mm) | 23 x 24.5 x 9 |
Weight | 15 g (typ.) |
Feature | Remote power supply via RF output |
Features
- High IP3
- Reverse polarity protection
- Solder pin for direct power supply
- Super Low Noise
- Remote power supply via output connector
- Low ripple
- High bandwidth
- Good input and output matching
- Reverse polarity protection
- Super-small mechanical dimensions
Applications
- Measurement and laboratory equipment
- Broadband amplifier for spectrum analysis
- Low noise broadband amplifier for monitoring systems
- Broadband power amplifier for networkanalysis (sweep oscillators)
Important notes
- Amplifier does not contain a coaxial relay!
Downloads