KU PA BB 005250-2 A, Breitbandverstärker
KU PA BB 005250-2 A, Breitbandverstärker KU PA BB 005250-2 A Frequenzdiagramm

KU PA BB 005250-2 A, RF Broadband Amplifier

'.3 Jahre Garantie / 3 years guarantee.'
'.Kühlung auf Anfrage / cooling on request.'
50 ... 2500 MHz • 2 W

 

analog & digital transmission systems     EMC


Lead time on request
Frequency range50..2500 MHz
Input power for P1dBtyp. +3 dBm
Maximum input power+10 dBm
Output power P1dBtyp. 33 dBm, min. 32.5 dBm (CW)
typ. 2 W, min. 1.8 W (CW)
Output power P3dBtyp. 34.7 dBm, min. 33.4 dBm (CW)
Output power P3dBtyp. 3 W, min. 2.2 W (CW)
Gain (small signal)typ. 33 dB, min. 31 dB
Gain flatness (small signal)typ. +/- 1 dB
Noise figure @ 18 °Ctyp. 4 dB
Harmonic rejection typ. 30 dB, min. 25 dB @ 31.7 dBm
IM3 (1)min. 35 dBc @ 30 dBm PEP
Efficiency typ. 10 % @ 33 dBm PEP
Input return loss (S11)min. 10 dB
Supply voltage+24 ... 26 V DC
Current consumptiontyp. 750 mA
Forward detectionyes (diode detector)
Operating case temp. range-20 ... +55 °C
VSWR of loadmax. 1.8 : 1
Input connector / impedanceSMA-female / 50 ohms
Output connector / impedanceSMA-female / 50 ohms
Casemilled aluminium
Dimensions (mm)80 x 60 x 20
Weight140 g (typ.)
(1)Measured 2-tone, frequency spacing: 1 MHz
  • Reverse polarity protection
  • Monitor output for forward power detection (DC voltage)
  • Test amplifier for high dynamic range applications
  • Power amplifier for EMC measurment
  • Power amplifier to increase the output level of standard signal generators or sweep signal generators

Please notice the following:
  • The technical specifications refer to room temperature.
  • The power amplifier doesn’t contain any coaxial relays.
  • The recommended combination of heat sink and fan(s) is only specified for an ambient temperature of 25 °C.
  • Further information about dimensioning of heat sinks is available on our FAQ site.

Accessories

References