KU UP 107 A - Up Konverter
KU UP 107 A - Up Konverter KU UP 107 A, Blockdiagramm

KU UP 107 A - Up Converter

10000 ... 10700 MHz

The up converter KU UP 107 A converts the frequency range 2260 MHz to 2310 MHz up to 10 GHz. The output signal is a 50 MHz segment in the range between 10000 MHz and 10700 MHz. The customer specific output frequency is determined by the LO (local oscillator) frequency .The internal filters provide high spurious rejection and image rejection. Due to low phase noise and high frequency stability of the local oscillator, the up converter is suitable for analog and digital communication systems.
Typical applications are Multichannel Multipoint Distribution Systems (MMDS) using QPSK modulation and DVB-T or DVB-S systems. The output power for digital applications of about 200 mW can be increased to several watts by the use of an additional power amplifier.
Lead time on request
Frequency range (IF)2260 ... 2310 MHz
Frequency range (RF)10000 ... 10700 MHz (one 50 MHz segment selectable
LO frequency7740 ... 8440 MHz
LO accuracy @ 18 °C+/- 50 kHz
LO frequency stability+/- 50 kHz
Phase noise @ 100 kHz-103 dBc/Hz
Image rejectiontyp. 50 dB
Gaintyp. 30 dB
Input powertyp. 1 mW (0 dBm)
Output power (Psat)1 W (+30 dBm)
Output power (COFDM)typ. 200 mW (+23 dBm)
Supply voltage+12 ... +14 V DC
Current consumptiontyp. 1.5 A
Input connector / impedanceSMA-female, 50 ohms
Output connector / impedanceSMA-female, 50 ohms
Casemilled aluminium
Dimensions (mm)126 x 64 x 22
Weight340 g
Please notice the following:
  • The output frequency range (RF) is selectable in the range from 10000 MHz ... 10700 MHz with 50 MHz bandwidth.