KU LNC 2027 C PRO, Down Converter
2000 ... 2700 MHz
-
- Gain 35/17 dB
- Configurable LO frequency & gain -
- High linearity
-
- Low influence on signal quality
-
- Easy monitoring of the operating condition
Available from stock
Technical specifications
Frequency range (RF) | 2000..2700 MHz |
Maximum input power | 1 mW (0dBm) |
Frequency range (IF) | 160..860 MHz |
Noise figure @ 18 °C | typ. 1.0 dB, max. 1.3 dB |
Gain @ 25 °C | typ. 35 dB / 17 dB |
Output IP3 | 26 dBm |
LO frequency | 1840 MHz |
LO accuracy @ 18 °C | +/- 2 ppm |
LO frequency stability | +/- 3 ppm |
Phase noise @ 1 kHz | typ. -93 dBc/Hz |
Phase noise @ 10 kHz | typ. - 101 dBc/Hz |
Phase noise @ 100 kHz | typ. -105 dBc/Hz |
Supply voltage | +9 ... +36 V DC |
Current consumption | typ. 150 mA @ 12 V DC |
Maximum case temperature | +55 °C |
Input connector / impedance | N-female, 50 ohms |
Output connector / impedance | N-female, 50 ohms |
Case | milled Aluminium, water resistant |
Weight | 230 g |
Remote power supply via IF | FERNSPEISUNG |
Features
- Low noise figure
- Large bandwidth
- Low phase noise oscillator
- High frequency stability of the oscillator
- High linearity
- Antenna port protected against static discharge
- Small and light-weight to allow easy pole mounting
- Tri-colour LED indicates unit status and gain mode setting
- Overvoltage protection and reverse polarity protection
- Remote power supply via output connector
- switchable gain
- switchable local oscillator frequencies
- normal or reverse output spectrum selectable
Applications
- Multichannel Multipoint Distribution Services (MMDS)
- Digital broadcast systems (DVB-T, DVB-S)
- Analog and digital transmission systems
Downloads