KU LNA 750850 A WG

KU LNA 750850 A WG, Low Noise Amplifier

7500 … 8500 MHz

 

Analog & digital transmission systems     Satelite ground station     Communication systems

 
  • Extremely low noise figure
  • Remote power supply via output connector possible
  • Low-power enable input pin
  • Reverse polarity protection


The KU LNA 750850 A WG is KUHNE’s newest X-band super low-noise amplifier and was particularly developed for low-noise receive applications, e.g., satellite ground station equipment. Thanks to the combination of an extremely low noise figure, a high gain and high P1dB and IP3, very weak input signals can be amplified with low noise to a power level that is easy to process. The RF input using a WR112 waveguide promises low-loss coupling to the antenna system.
Available from stock
Frequency range7500..8500 MHz
Noise figure @ 18 °Ctyp. 0.7 dB, max. 0.85 dB (7.5 GHz ... 8 GHz)
typ. 0.8 dB, max. 0.95 dB (8 GHz ... 8.5 GHz)
Gaintyp. 65 dB
Gain flatnesstyp. +/- 1 dB
Maximum input power1 mW
Output power (P1dB)typ. 13 dBm
Output IP3typ. +23 dBm
Input return loss (S11)typ. 8 dB
min. 6 dB
Output return loss (S22)typ. 15 dB
min. 10 dB
Supply voltage+9 ... 15 V DC
Current consumptiontyp. 220 mA
Operating case temp. range-40 ... +65 °C
Input connector / impedanceWaveguide WR84 / WG15 / WR112
Output connector / impedanceN-female, 50 ohms
Casemilled aluminium
Dimensions (mm)99.2 X 76 X 63.5
Weight440 g (typ.)
The KU LNA 750850 A WG has a bandwidth of 7.5 GHz to 8.5 GHz and is therefore suitable for a variety of applications in the X-band microwave range, e.g., for the amplification of weak satellite signals in low-noise receivers. Moreover, the KU LNA 750850 A WG shows a gain of typically 65 dB and a very low noise figure of typ. in between 0.7 dB and 0.8 dB. A low power enable pin and reverse polarity protection furthermore increase user friendliness.
  • Extremely low noise figure
  • Remote power supply via output connector possible
  • Low-power enable input pinReverse polarity protection
One of the critical key components of a wireless system is the low-noise amplifier (LNA). The LNA, usually connected close to the antenna, takes the weak radio-frequency (RF) signal from the antenna and amplifies it. The main function of the pre amp is to increase the amplitude of the receiving signal without adding much noise and distortion, in other words, to nearly maintain the signal to noise ratio (SNR)  of the desired RF signal.  The main characteristics of the low noise preamplifier are noise figure (NF), gain, and linearity. KUHNE electronic provides a variety of high quality low-noise and ultra low-noise amplifiers, covering frequency bands L, S, C, X, K, frequency selective and broadband. The functional bandwidth varies from several MHz to about 20 GHz. The website-filter on the product page can be used to refine your search results by frequency range, gain, noise figure and supply voltage. The broad portfolio of KUHNE RF LNAs offers high performance including low noise figure (NF), high gain, high linearity and small power consumption, therewith supports the customers in many different use cases and scenarios, e.g., high and low bandwidth applications, in commercial usage as well as for lab experiments and research. Several application examples are given as follows: the 2 GHz UHF broadband low noise amplifier KU LNA BB 2227 A can be used in the RF front end of a multitude of wireless standards in the ISM band, like UMTS, bluetooth, radar, or 2.4 GHz Wi-Fi, e.g., supporting the communication and video transportation in sports events. Another example is the 5-6 GHZ RF linear preamp KU LNA 5059 A, which is needed in IEEE 802.11a/n/ac Wi-Fi systems operating in the 5.1-5.85 GHz range. Other applications like Automatic Dependent Surveillance Broadcast (ADS-B): KU LNA 1090-2 A, Multichannel Multipoint Distribution Service (MMDS): KU LNA BB 2227 A, Radio astronomy: KU LNA 142 AH, Satellite Communication (Satcom) systems: KU LNA 152 AH and so on can be found in the product descriptions. KUHNE electronic also focuses on the dynamic demands of markets and provides most up-to-date customized solutions. We offer low-noise amplifiers (LNAs) with special features, such as different connector types (SMA, N, Waveguide, and many more), remote power supply via coaxial cable, waterproof cases and so on. Our professional RF products and components enable optimum measure, test, and field application experience.