KU LNA BB 0515-2 B-N, Breitband Vorverstärker

KU LNA BB 0515-2 B-N, Low Noise Broadband Amplifie

5 ... 1500 MHz


 

monitoring systems     test equipment     high IP3


Lead time on request
Frequency range5..1500 MHz
Noise figure @ 18 °Ctyp. 1.2 dB, max 2.0 dB NF (30 ... 1500 MHz)
Gaintyp. 20 dB, min. 18 dB
Maximum input power15 mW
Output power (P1dB)typ. 125 mW (+21 dBm)
Output IP333 dBm
Input return loss (S11)min. 6 dB (30 MHz ... 1500 MHz)
Supply voltage+12 ... 14 V DC
Current consumptiontyp. 90 mA
Operating case temp. range-20 ... +65°C
Input connector / impedanceN-female, 50 ohms
Output connector / impedanceN-female, 50 ohms
Casemilled aluminium
Dimensions (mm)50 x 30 x 22
Weight85 g (typ.)
This super low noise wideband amplifier was designed to cover the 5 ... 1500 MHz frequency range. The noise figure is typ. 1.2 dB at 20 dB gain. Simultaneously the broadband amplifier has a high IP 3 and a output power of > 100 mW. With this outstanding performences, this amplifier may be used for many applications. The amplifier is coupled via a high pass filter for suppressing frequencies below 5 MHz.
  • High IP3
  • Large bandwidth
  • Reverse polarity protection
  • Solder pin for direct power supply
  • Small mechanical dimensions
  • Measurement and laboratory equipment
  • Broadband amplifier for spectrumanalysis
  • Low noise broadband amplifier for watchingsystems
  • Broadband power amplifier for networkanalysis (sweep oscillators)
  • Suitable for large signal environments
  • CATV Distribution amplifier
  • Amplifier does not contain a coaxial relay!
  • Maximum input power +12 dBm