Power Amplifiers

Kuhne electronic carries a large selection of off-the-shelf as well as customized power amplifiers in the RF and microwave frequency bands, for both small and large volume levels. Power amplifier range is from 30 MHz – 50 GHz with power rating up to 1 KW and above. Our portfolio contains modules and rack mounted RF and microwave systems based on technology using GaAs-FET, LDMOS, GaN and bipolar devices. We are well-known in the industry for adapting our amplifier modules to customized designs e.g. in low and high power RF & microwave signal generator solutions for various applications like microwave heating, RF plasma generation, ION implantation and others. Our broad scope of amplifiers is used across the spectrum of industrial & commercial and governmental applications including lab instrumentation, EMC radiated immunity testing, PIM test equipment, video & broadcast communication, satellite ground stations, telecom infrastructure, law enforcement, UAV & UGV operation, jamming and many others. Frequencies in VHF/UHF, L, S, C, X, KU, K band are covered, going hand in hand with a variety of special solutions like digital predistortion linearized and bi-directional amplifiers. Rack mounted solutions are ready to go with or without RS-232, USB or LAN connectivity, with the optional possibility to easily & intuitively operate and remotely control the equipment with a GUI ( graphical user interface ). Module based solutions are available with or without heatsinks and fans. A 3-year-warranty backs our products and supports our customers.

Frequency range
Output power (W)
Gain (dB)
Sort by recommendation
1
     
KU PA BB 003055-100 A, RF Power Amplifier
  • Frequency range
  • 30..550 MHz
  • Output power P3dB
  • typ. 100 W, min. 80 W (CW)
  • Gain (small signal)
  • typ. 49 dB, min. 47 dB
  • Supply voltage
  • +28 V DC
Available from stock
KU PA BB 005090-6 A - RF Power Amplifier
  • Frequency range
  • 50..900 MHz
  • Output power P1dB
  • typ. 6 W, min. 5 W (CW) (50 ... 500 MHz)
  • Gain (small signal)
  • min. 31.5 dB
  • Supply voltage
  • +28 V DC
Available from stock
KU PA BB 005250-2 A, RF Broadband Amplifier
  • Frequency range
  • 50..2500 MHz
  • Output power P1dB
  • typ. 2 W, min. 1.8 W (CW)
  • Gain (small signal)
  • typ. 33 dB, min. 31 dB
  • Supply voltage
  • +24 ... 26 V DC
Available from stock
KU PA BB 003250-6 A - RF Broadband Power Amplifier
  • Frequency range
  • 30..2500 MHz
  • Output power P3dB
  • typ. 6 W, min. 5 W
  • Gain (small signal)
  • min. 45 dB
  • Supply voltage
  • +28 V DC
Available from stock
KU PA BB 005300-3 A, RF Broadband Power Amplifier
  • Frequency range
  • 50..3000 MHz
  • Output power P1dB
  • min. 3 W CW (50 ... 2000 MHz)
  • Gain (small signal)
  • min. 30 dB
  • Supply voltage
  • +24 ... 26 V DC
Delivery Time on request
KU PA 006008-30 HY, MOSFET-Power Amplifier
  • Frequency range
  • 62..78 MHz
  • Output power P1dB
  • min. 10 W (CW)
  • Gain (small signal)
  • min. 37 dB
  • Supply voltage
  • +12 ... 14 V DC
Delivery Time on request
KU PA 014018-50 HY, RF Power Amplifier
  • Frequency range
  • 140..180 MHz
  • Output power P3dB
  • typ. 50 W, min. 45 W
  • Gain (small signal)
  • typ. 36 dB, min. 34 dB
  • Supply voltage
  • +12 ... 14 V DC
Available from stock
KU PA 013017-100 HY, RF Power Amplifier
  • Frequency range
  • 130..170 MHz
  • Output power P1dB
  • typ. 50 W, min. 30 W (CW)
  • Gain (small signal)
  • typ. 40 dB, min. 35 dB
  • Supply voltage
  • +12 ... 14 V DC
Available from stock
KU PA 026026-500 RACK
  • Frequency range
  • 260..260 MHz
  • Output power P1dB
  • min. 850 W (CW)
  • Dimensions (mm)
  • 3 HE, 350 mm depth
  • 5 HE, 450 mm deep
Delivery Time on request
KU PA 040048-60 HY, UHF MOSFET-Power Amplifier
  • Frequency range
  • 400..480 MHz
  • Output power P1dB
  • min. 20 W (CW)
  • Gain (small signal)
  • min. 34 dB
  • Supply voltage
  • +12 ... 14 V DC
Delivery Time on request
KU PA 040048-100 HY, UHF power amplifier
  • Frequency range
  • 400..480 MHz
  • Output power P1dB
  • min. 30 W (CW)
  • Gain (small signal)
  • min. 34 dB
  • Supply voltage
  • +12 ... 14 V DC
Delivery Time on request
KU PA 040050-7 HY, MOSFET Power Amplifier
  • Frequency range
  • 400..500 MHz
  • Gain (small signal)
  • min. 23 dB
  • Supply voltage
  • +12 ... 14 V DC
Delivery Time on request
1
     
Radio frequency (RF) and microwave power amplifiers (PAs) are electronic circuits used for the amplification of low power radio frequency signals to high power levels. The most common application of such high-power RF signals is driving of transmit antennas in wireless communications. Since the RF signals are attenuated as they propagate through space, wireless coverage of large areas or wide-range point-to-point connections often require large amounts of transmit power. Another application of high-power RF signals is the generation of strong electromagnetic fields in various types of cavities, where they are used for technical and physical processes like microwave heating, plasma generation, particle acceleration, or in test and measurement setups for EMC tests and characterization of RF and microwave components. Technical applications requiring high RF power levels range from microwave cooking to the treatment and finishing of materials and surfaces as well as medical appliances and optics. The characteristic performance criteria of RF power amplifiers include frequency, RF bandwidth, video bandwidth, maximum output power, energy efficiency and linearity. With his choice of an appropriate power amplifier circuit topology and active device technology (LDMOS, GaN / GaAs HEMT, InGaP HBT, etc…), the RFPA designer tries to find the best possible balance between these, often conflicting, performance criteria, based on the requirements of a given application. For example, a Class A amplifier can be highly linear, generates little harmonics and is rather robust, but is very inefficient on the other hand. It is chosen for applications that demand very high linearity and/or very high bandwidth. In contrast, the Class AB amplifier can be made far more efficient but will not be as linear as the Class A amplifier. It is best suited for applications that demand moderate linearity and bandwidth but benefit from its high efficiency. For applications that require both high linearity and high efficiency, the Class AB amplifier can be linearized using analogue, digital or hybrid predistortion techniques. In very demanding applications like cellular mobile radio or digital terrestrial television broadcast, more sophisticated circuit topologies like the Doherty PA are commonly used to further increase the average efficiency of the transmitter chain while maintaining high linearity. Due to the scarcity of wireless spectrum and the subsequent need for efficient spectrum usage, the wireless communications field is dominated by modulation formats that impose strict linearity requirements on the power amplifier. In contrast to that, the high-power RF signal generators used in technical applications usually generate constant envelope signals at fixed frequencies and thus do not rely on high linearity power amplifiers. Under such conditions, switched mode power amplifiers can be used. By operating the active devices in saturation and application of waveform shaping techniques, these nonlinear power amplifiers enable very high energy efficiencies of up to 80% and more.