KU PA 10201050-30 A

KU PA 10201050-30 A, GaAs-FET Power Amplifier

10200 ... 10500 MHz • 30 W
Lead time on request
Frequency range10200..10500 MHz
Input power for P1dBtyp. 23 dBm
Maximum input power26 dBm
Output power P1dBtyp. 44 dBm, min. 44.7 dBm
typ. 30 W, min. 25 W
Output power COFDM (1)typ. 30 dBm, min. 27 dBm
typ. 1 W, min. 0.5 W
Gain (small signal)typ. 23 dB
Gain flatness (small signal)typ. +/- 1 dB
Harmonic rejection typ. 40 dB @ 44 dBm
Over temperature protectionyes
IM3 (2)typ. 20 dBc @ 40 dBm PEP
Efficiency typ. 20 % @ 44 dBm (CW)
ON voltage+5 ... 15 V DC
Supply voltage+12 ... 14 V DC
Current consumption @ P1dBtyp. 12.5 A
Forward detectionyes (diode detector)
VSWR of loadmax. 1.8 : 1
Operating case temp. range-20 ... +55 °C
Input connector / impedanceSMA-female / 50 ohms
Output connector / impedanceSMA-female / 50 ohms
Casemilled aluminium
Dimensions (mm)158 x 64 x 22
Weight380 g (typ.)
(1)Measured with QAM 64, single carrier, EVM: 2%
(2)Measured 2-tone, frequency spacing: 1 MHz
  • GaAs FET technology
  • High linearity (class A operation)
  • Detector output (DC voltage) for monitoring forward output power
  • Reverse polarity protection
  • ON / OFF control with DC voltage
  • Small mechanical dimensions
  • Overvoltage protection
  • Analog and digital transmission systems
Please notice the following:
  • The technical specifications refer to room temperature.
  • The power amplifier doesn’t contain any coaxial relays.
  • The recommended combination of heat sink and fan(s) is only specified for an ambient temperature of 25 °C.
  • Further information about dimensioning of heat sinks is available on our FAQ site.

Accessories

References