KU PA BB 070270-80 A 2.1.1

KU PA BB 070270-80 A-2.1.1, Power Amplifier

600 ... 2700 MHz • 100 W

 

 analog & digital transmission systems     test equipment     jamming


- versatile application
- for all common mobile radio bands
- Excellent operational safety thanks to numerous protection and monitoring circuits
Available from stock
Frequency range600..2700 MHz
Maximum input power+10 dBm
Saturation powermin. 49 dBm
min. 80 W
Gain (small signal)typ. 52 dB
IM3 (1)typ. 22 dBc @ 80 W PEP
Efficiency typ. 25 % @ 80 W (CW)
Input return loss (S11)typ. 12 dB, min. 10 dB
ON voltage+5 V DC
Supply voltage+ 32 V DC
Quiescent currenttyp. 2.8 A
Current consumptiontyp. 13 A, max. 15 A
Forward detectionyes (diode detector)
Reflected power detectionyes (diode detector)
Operating case temp. range-20 ... +55 °C
Input connector / impedanceSMA-female / 50 ohms
Output connector / impedanceSMA-female / 50 ohms
Casemilled aluminium
Dimensions (mm)180 x 95 x 26
Weight800 g (typ.)
(1)Measured 2-tone, frequency spacing: 1 MHz
  • GaN technology
  • Wide bandwidth
  • High gain
  • Monitor output for forward power detection
  • Monitor output for reverse power detection
  • SWR protection
  • Power good indication
  • Over temperature protection
  • Gate Current protection
  • CW / pulsed systems
  • Laboratory equipment
  • Radar
  • Jammer
Please notice the following:The technical specifications refer to room temperature.
  • The power amplifier doesn’t contain any coaxial relays.
  • The recommended combination of heat sink and fan(s) is only specified for an ambient temperature of 25 °C.
  • Further information about dimensioning of heat sinks is available on our FAQ site.
  • The recommended fans need a supply voltage of 24 ... 28 V DC.

Accessories