KU PA 600770-2 A, Leistungsverstärker

KU PA 600770-2 A, RF Power Amplifier

6000 ... 7700 MHz • 2 W
Lead time on request
Frequency range6000..7700 MHz
Input power for P1dBmax. 10 dBm
Maximum input power+15 dBm
Output power P1dBtyp. 33 dBm, min. 32.5 dBm (CW)
typ. 2 W, min. 1.8 W (CW)
Output power P3dBtyp. 34.8 dBm, min. 34 dBm (CW)
Output power P3dBtyp. 3 W, min. 2.5 (CW)
Output power COFDM (1)typ. 26 dBm, min. 24 dBm
typ. 400 mW, min. 250 mW
Gain (small signal)typ. 28 dB, min. 26 dB
Gain flatness (small signal)typ. +/- 1.5 dB
Harmonic rejection min. 25 dB @ 31.7 dBm
IM3 (2)min. 25 dBc @ 30 dBm PEP
Efficiency typ. 10 % @ 33 dBm PEP
Input return loss (S11)typ. 10 dB
Supply voltage+12 ... 14 V DC
Quiescent currenttyp. 1.2 A
Current consumptionmax. 1.7 A
Forward detectionyes (diode detector)
Operating case temp. range-20 ... +55 °C
VSWR of loadmax. 1.8 : 1
Input connector / impedanceSMA-female / 50 ohms
Output connector / impedanceSMA-female / 50 ohms
Casemilled aluminium
Dimensions (mm)50 x 30 x 18
Weight45 g (typ.)
(1)Measured with QAM 64, single carrier, EVM: 2%
(2)Measured 2-tone, frequency spacing: 1 MHz
  • GaAs-FET-technology
  • High linearity (class A operation)
  • High bandwidth
  • Monitor output for forward power detection (DC voltage)
  • Reverse polarity protection
  • Small mechanical dimensions
  • Low power applications
  • Measurement and laboratory equipment
  • Analog and digital transmission systems
  • Amateur radio

Accessories

References