KU PA 080090-08 A, GaAs-FET Leistungsverstärker

KU PA 080090-08 A, GaAs-FET Power Amplifier

800 ... 900 MHz
Available from stock
Frequency range800..900 MHz
Input power for P1dBmin. 14 dBm
Maximum input power+17 dBm
Output power P1dBtyp. 29 dBm (CW)
typ. 800 mW (CW)
Output power P3dBtyp. 30 dBm (CW)
Output power P3dBtyp. 1 W (CW)
Output power COFDM (1)min. 23 dBm
min. 200 mW
Gain (small signal)min. 15 dB
Gain flatness (small signal)+/-0.5 dB (typ.)
Harmonic rejection min. 28 dB @ 28.7 dBm
IM3 (2)min. 46 dBc @ 24.7 dBm PEP
Efficiency min. 20 % @ 29 dBm (CW)
Supply voltage+12 ... 14 V DC
Quiescent currenttyp. 0.35 A
Current consumptiontyp. 0.35 A
Operating case temp. range-20 ... +55 °C
VSWR of loadmax. 1.8 : 1
Input connector / impedanceN-female / 50 ohms
Output connector / impedanceN-female / 50 Ohms
Casemilled aluminium
Dimensions (mm)50 x 30 x 22
Weight90 g (typ.)
(1)Measured with QAM 64, single carrier, EVM: 2%
(2)Measured 2-tone, frequency spacing: 1 MHz
  • High linearity
  • Reverse polarity protection
  • Milled aluminium case
  • Small mechanical dimensions
  • Low power applications
  • Driver amplifier
  • Analog and digital transmission systems
Please notice the following:
  • The technical specifications refer to room temperature.
  • The power amplifier doesn’t contain any coaxial relays.
  • The recommended combination of heat sink and fan(s) is only specified for an ambient temperature of 25 °C.
  • Further information about dimensioning of heat sinks is available on our FAQ site.